Menu

Sky5000 Alexander Pedals

In stock

The Sky 5000 bathes your signal in an excess of echoes, a deluge of delay, and a surfeit of shimmer.  All of the ambience you desire is a footstep away.

229,00

Sky5000
successfully added to cart


Total :
There is products in your cart.
The shipping costs will be calculated during your order.

Total products

  • Description
  • Guarantee
  • Delivery
  • Return
  • Customer reviews

Alexander Pedals Sky5000

The Sky 5000 bathes your signal in an excess of echoes, a deluge of delay, and a surfeit of shimmer.  All of the ambience you desire is a footstep away.

Building a great delay pedal was foremost in our minds when we designed the original Sky Fi.  Development began with a crystal-clear digital delay engine combined with a tone filter to allow tailoring of the response to your liking.  We then added a reverb engine that draws inspiration from certain digital rack units of the ’80s and ’90s.  These units were designed to be as affordable as possible, and had some unique hardware quirks that caused their reverb effects to build in intensity over time.  This “slow-building” artifact is one of the things that made these units so special.

When it came time to adapt the Sky Fi to the Neo Series platform we decided to keep the essential simplicity of the original. Inside the Sky 5000 you’ll find the same great tones from the Sky Fi, with a few tweaks to improve the performance and audio quality. Tap tempo, a simplified Repeat control, and more selectable delay tone options await. We hope you love this pedal as much as we do.

The Sky 5000 features dual Reverb and Delay engines, routed internally in a parallel configuration. This allows you to combine the two effects without having the reverb wash out the delay, or the delay muddy up the reverb.

Each engine has three separate settings, and you can combine them in any way you like. If you want to use only the reverb or only the delay, you can set their levels to zero using the pedal knobs.

REVERB ENGINE:

RVB Slow-building ‘90s style reverb effect. Capable of huge washes or subtle ambience, you decide.

+1 Classic “shimmering” upper octave effect. We add in the octave both before and after the reverb for maximum effect.

-1 Adds an octave down to the reverb effect. We think it sounds like a cello playing along with you.

DELAY ENGINE:

DIG Bright and present digital delay, taken from our original Radical Delay pedal. Use this when you need to cut like a knife.

BBD Darker analog sounding delay effect. Rich and creamy, pairs nicely with the +1 engine for maximum unforgettable fire.

OIL DARK sounding delay, murky and a little distorted. Based on our fave vintage electrostatic “oil can” delay unit.

Specifications

Nine effects combinations

Four presets, expandable to 16 with a MIDI controller

MultiJack enables expression pedal, foot switch, or MIDI input

Neo Morph allows controlling all knobs from expression or MIDI

Tap Tempo with quarter, dotted eighth, eighth note divisions

Hold Tap switch to trigger Ramp Hold + Neo Morph

USB port for firmware updates and USB MIDI

Mono input

Dual output (mix signal on tip, dry signal on ring)

Input Impedance: 1M ohms

Output Impedance: 560 ohms

DC 9V only, 100mA or greater

Requires isolated DC power supply

4.7” x 2.6” x 1.5” H x W x D not including knobs

PRESETS

Four built-in presets give you quadruple the tones in a single footprint. Add a MIDI controller for 16 presets.

morph.jpg

NEO MORPH

Seamlessly morph between different knob settings on the fly using the built-in ramp footswitch, expression pedal, Neo Footswitch, or MIDI controller.

multijack.jpg

MULTIJACK

Connect an expression pedal, Neo Footswitch, or MIDI controller to this jack to add performance control to your pedal.

taptempo.jpg

TAP TEMPO

Accurate tap tempo control over the delay engine. Quarter, dotted eighth, and eighth note subdivisions are available.

autotrails.jpg

AUTO TRAILS

Set the pedal trails from 0-10 seconds. The pedal will automatically perform a smooth fade at your chosen time.

ramp.jpg

RAMP HOLD

Hold the Tap / Ramp footswitch to engage the Neo Morph function. Ramps all of the pedal knobs, configurable from 0-10 sec.

midi.jpg

MIDI CONTROL

Every knob and setting on the pedal is controllable using MIDI. Connect using the MultiJack and our Neo Link or directly to any Disaster Area Gen3 controller.

select.jpg

SELECT BUTTON

Tap this button to select a new sound mode. Hold it down to access the alternate knob functions (listed in parentheses).

usb.jpg

USB PORT

Every Neo Series pedal features a USB port for MIDI control and firmware updates.

 

Two-year warranty

The Effect Factory applies a two-year replacement warranty for all manufacturer issues. For more details please visit our page terms and conditions.

Shipping in France and Belgium.


- The standard shipment (48h) is processed by Colissimo. For every order above 150 euros the shipping is free of charge. For every order under 150 euros, 10 euros will be charged for shipping fee. There is an upcharge of 4€ for shipping to Belgium.
- The fast shipment (24h) is processed by UPS. UPS only deliver in person, therefore someone must by present in order to receive the order. The fast shipment is charged 15 euros. There is an upcharge of 4€ for shipping to Belgium.

For international shipping please refer yourself to the terms and condition.

Returns

If you are not 100% satisfied with your purchase you may return it for a full refund. The return must be done within a maximum of 14 day after the receiving date. A return form must be attached to the returning product. In order to have the return form please send us an email with the purpose of your return. For more details please visit the terms and conditions.

There is no review for Sky5000

Your email address will not be published. Required fields are marked *

Shipping cost

Free shipping to France from 150 Euros

Secure payment

with Credit card, Visa and Paypal

2 years warranty

Above all the catalog

X